Scotts Damper Mount Kit Honda (4601) Sub O/S Bar XR 650 R Forward Post with Triple Clamp supplied (XR 650 + 8 Cables) Australia
Shown here is the "SUB" mounted kit for the XR650. The complete mount kit includes, billet aluminum triple clamp, frame bracket-that reaches our front and allows quick access to the oil filler hole, the SUB MOUNT itself, which is made for oversize bars, tower pin, instruction manual and necessary hardware. The bars shown in this picture are not included in this kit price but can be ordered separately online here. The odometer requires re-location or elimination due to the location of the tower. An optional stainless steel ODO bracket is available from Scotts to remount the odometer to the front fork pinch pinch bolts, if needed. This kit also includes longer Throttle cables. Required will be the damper unit itself and Link arm which is supplied when purchasing damper.
The term �SUB� stands for �Stabilizer Under Bars�. We designed a Triple Clamp to accept the SUB mount putting the Stabilizer Under the Bars while still allowing access for on-the-fly adjustment. The beauty of this design is; you can take your stabilizer from one bike to another without having to buy another stabilizer. The stabilizer unbolts from the mounting components on all of our kits. In addition, our triple clamps received the highest 5-star rating from multiple leading National Magazines, including Dirt Rider and Motocross Action. This triple clamp kit is machined from a 6061 billet block of aluminum and then anodized to give your model that "Factory bike" look, while increasing performance in strength, stability, steering and adding clamping surface. Some off-road bikes have such large, awkward triple clamps that stabilizer installation and fuel tank options have become very difficult. The Scotts/BRP triple clamps are machined to be very attractive and extremely functional, eliminating the majority of problems associated with many after market triple clamps. We also make some triple clamps exclusively that cannot be found anywhere but at Scotts. The Sub Mount kit is designed to use 1 1/8" (28mm) oversize handlebars but can be converted back to standard 7/8" (22mm) diameter bars by using our optional bar reducers. The SUB Mount Triple clamp kit, in most cases, includes the Scotts/BRP Triple Clamp with matching anodized barclamp, Scotts steering stabilizer, linkarm, SUB mount frame bracket, all the necessary hardware, step by step pictured instructions and the Owners Manual. The SUB mount typically raises the position of the bars approximately 11-25mm, depending on the model, which may or may not be an advantage for your riding style. If you should need a different bend of Oversize handlebars, either higher or lower, they are available here online for ordering, at an additional charge. Use the product index and select �Handlebars� for a full menu of bar selections. The Photo you are looking at is a generic photo to show you the basic components in the kit, but may not be showing the exact kit for your specific bike. The bars in the picture are not included in the kit
Be The First To Review This Product!
Help other Dirt Bike users shop smarter by writing reviews for products you have purchased.