Scotts Damper Australia (Mount Kit ONLY) TOP : (6765) (BCL 106 40 29) O/S Bar CRF 450 R / RX 21-Current , CRF 250 R 2022-Current

SKU: SC-MK-HON-TOP-G-6765

Scotts Damper Australia (Mount Kit ONLY) TOP : (6765) (BCL 106 40 29) O/S Bar CRF 450 R / RX 21-Current , CRF 250 R 2022-Current

HON-TOP-G-6765

$439.95

This item is a stocked item. That is we aim to have it on the shelf in Australia ready to ship. Not all stocked items are always on the shelf, you are welcome to contact us via phone or email and check stock status and or our expected next delivery from supplier. Thanks in advance, the Dirtbike crew.

Calculate Shipping

Standard Shipping Toll - $19.00

Australia Post - $25.00
Express Post

pick-up from store BY ARRANGEMENT ONLY - $0.00
pick-up from store BY ARRANGEMENT ONLY

Description

Scotts Mount Kit Honda TOP (6765) (BCL 106 40 29) O/S Bar CRF 450 R / RX 21-Current , CRF 250 R 2022-Current

SCOTTS Top Mount Bolt-on Kit DM-1064029/45-6765

The long awaited latest generation Honda CRF 250/450 frame brackets are finally here! We are currently accepting preorders as these are expected to be ready to ship in the 2nd half of April!

If you have a Scotts stabilizer and want an “Easy Bolt-On” mounting solution, the DM-Bolt Kit is just for you. Scotts Performance DM-Bolt “Dirt Mount” Kits are a conventional mounting (Above Bar) solution that is a breeze to install.

SCOTTS Top Mount Bolt-on Kit DM-1064029/45-6765 Kit includes:

Scotts top bar clamp 1064029 or 1044045
Scotts bolt on tower FBD-6765
Tower pin SRP-4033-08
stem spacer (only used for position 3)
optional: Cable Guide CSE-1011-0006

The Clean Speed Cable Guide is highly recommended because the throttle cables will rub against and through the aluminum of the Scotts Stabilizer!

We offer this kit for applications using the OEM triple clamp and bar mounts. In many cases we are able to accommodate some aftermarket triple clamps and/or bar mounts especially BRP and Scotts. If your set up is not OEM please contact us so we can get you the proper setup.

SPECIAL NOTES:

When mounting a stabilizer on certain OEM applications you may need to bend the crossbar, reverse mount stabilizer or purchase new bars to provide clearance for the stabilizer. Some applications may require slight filing on the frame and or triple clamp or the use of special rubber bar mount bushings for proper tower fitment.